GPS & GPRS Vehicle Tracking System(850/1900Mhz) / GPS & GPRS
Funtions
A,Stop GPS and GPRS update function automatically when park.(Save too much GPRS flux and power!)
B,Call to activate GPRS connection function automatically.
Stop GPS and GPRS update function automatically(Save too much GPRS flux and power!)
If the car is in off status,and ACC is on,but speek is 0KM/H,the device will send location to the server once every 3 minutes.
ACC is closed,the device sends location datas to the server once or twice(Lan&Long,ACC status,speed,direction),in 10 minutes the mainframe will be in dormancy,which save too much GPRS flux and power.
Call to activate GPS/GPRS Connection function!
GPRS and GPS are in off status,ACC starts again or any call dial the device,it will be activated and connected to the server automatically,resume to send GPS datas.Users can setup time interval to send datas freely(from from 5 seconds to 65,535 seconds. )
Feature & Functions:
1. Real-time Monitoring.
Because of the main communication of the system are GPRS and the Internet. it makes GPS products can monitoring uninterrupted and implementation for the second time in the car, GPS control center can achieve real-time traffic monitoring.
2. GPS Orientation, GPS receiver will output a complete position.
3. Automatic Report Position/Status
Data content: vehicle status, ACC status, time, longitude&latitude, speed, and direction.:
a. Intelligent moving report (no less than 20 Seconds, no higher than 5000 seconds when in moving)
b. Intelligent stopping report (Automatic at every 3 minutes when stopping).
4. Engine running time recording(Triggered by 6-16 volt input,Can time record up to 99999 hours. exact to seconds.),
5. History data store even power off.
The device with a memory chip to store up to 512 messages even GPRS network unavailable and system can not send message to server.
6. History Playback.
You can Replay the track of the car what and when do you want to konw.include moving route,speed.
7. Remote modify vehicle setup,
8. Automatic keep GPRS alive.
9. Speeding Report.
When vehicle is out of predefined speed, a report will be generated on the control center immediately.
10. Domain name setting
(Fox example: FFIP:"TCP","WWW.ABC.COM","8010")
11. Geo-fence.
When UNIT is out of these predefined zones, a report will be generated.
12 Cut off power & gas supply.
13 Emergency Help. With a emergency button to call control center when accident is befell.
14 Power Off and Wire Cut-off Report.
If the power is off or the wire of mainframe is cut off, this device will report to control center.
